Replacement Runners for Deployment Bags — Injection Molded PVC, Pair
Replacement runners — the skids that run the length of the underside of a deployment bag — sold as a pair with the mounting hardware included. Runners take the drag every time the bag gets hauled up a ramp or across a deck, and they are what the bag rests on when it is standing still. Replacing them costs a fraction of replacing the bottom of the bag.
Dimensions
Built to the runner dimensions in the USMC collapsible deployment bag purchase description, PD-20-01 §3.3.5.2. Measure yours against these before ordering:
| Length | 24.75 inches |
|---|---|
| Height | 0.75 inch |
| Width | 1.1875 inches, tapering to 0.625 inch |
| Material | Non-rigid PVC, ASTM D2287 |
| Process | Injection molded |
| Colour | Black |
| Mounting | Four #10 screw set assemblies per runner, through the bottom plate |
Injection molded, not extruded
You will see this part sold elsewhere as an “extruded rubber runner”. Ours is neither. It is non-rigid PVC, injection molded — and for a part whose cross-section tapers from 1.1875 down to 0.625 of an inch and carries four fastener points, that matters. Extrusion produces a constant profile that then has to be cut and drilled; a mould produces the tapered form and the fastener geometry in one shot, the same on every part.
If you are cross-shopping, that is the difference. Same PD-20-01 dimensions, different process.
Fitment
Fits Halford deployment bags and other wheeled loadout bags with bolt-on underside runners — including Force Protector Gear short-chassis bags and USMC-issue wheeled deployment bags built to the same pattern.
Measure the runner on your bag end to end. If it is around 24.75 inches with four fasteners, these are the right part. Not sure? Send us a photo before you order.
What's included
- Two (2) injection molded PVC runners
- Mounting hardware for both runners
- Made in Mexico
Field replacement
Replaceable in the field with a Phillips screwdriver and a 3/8" wrench. Pull the old runners, line the new ones up on the existing holes, torque down.
Also available
- Replacement polyurethane ABEC 5 wheels (pair)
- Complete #304 stainless steel wheel housings (pair)
- Deployment Load Out Bag — the complete bag, made in the USA
"Force Protector Gear" and "Deployer" are trademarks of their respective owner. Halford Gear is not affiliated with, endorsed by, or an authorized dealer for that company. Compatibility is stated to help you identify the correct part.
