{"title":"Replacement Parts \u0026 Accessories","description":"\u003cp\u003eField-replaceable parts for wheeled deployment and loadout bags — stainless steel wheel housings, ball-bearing wheels, and extruded rubber runners, sold in pairs with the mounting hardware included. Fits Halford deployment bags and other stainless-housing wheeled loadout bags, including Force Protector Gear Deployer® and USMC-issue deployment bags.\u003c\/p\u003e","products":[{"product_id":"deployment-bag-replacement-wheels-pair","title":"Replacement Wheels for Deployment Bags — Ball Bearing, Pair","description":"\u003cp\u003e\u003cstrong\u003eReplacement polyurethane wheels with ABEC 5 bearings for wheeled deployment and loadout bags, sold as a pair with the mounting hardware included.\u003c\/strong\u003e When the wheels go, the bag stops being wheeled luggage and starts being a very heavy duffel — but the bag itself is usually fine. This is the inexpensive fix.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003eBuilt to the wheel dimensions in the USMC collapsible deployment bag purchase description, \u003cstrong\u003ePD-20-01 §3.3.5.1.1\u003c\/strong\u003e. Measure yours against these before ordering:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1.0 inch, tapering to 0.75 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing\u003c\/th\u003e\n\u003ctd\u003eABEC 5, 0.875 inch outer diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInsert\u003c\/th\u003e\n\u003ctd\u003e2.0 inch outer diameter, 0.875 inch inner diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Halford deployment bags and other wheeled loadout bags using stainless steel corner wheel housings with replaceable wheels — including \u003cstrong\u003eForce Protector Gear Deployer®\u003c\/strong\u003e bags and USMC-issue wheeled deployment bags built to the same pattern.\u003c\/p\u003e\n\u003cp\u003eIf your bag has a stainless housing at each rear corner with a wheel that can be driven out, and the wheel measures about 3 inches across, these fit. Not sure? \u003ca href=\"\/pages\/contact\"\u003eEmail us a photo\u003c\/a\u003e of the housing and we'll tell you before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) polyurethane ABEC 5 bearing wheels\u003c\/li\u003e\n\u003cli\u003eMounting hardware for both wheels\u003c\/li\u003e\n\u003cli\u003eMade in Mexico\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eField replacement\u003c\/h3\u003e\n\u003cp\u003eReplaceable in the field with a Phillips screwdriver and a 3\/8\" wrench. No shop, no rivets, nothing to send away — PD-20-01 requires the bag to be field repairable with minimal tools, and this is the part that makes that true.\u003c\/p\u003e\n\n\u003ch3\u003eAlso available\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deployment-bag-stainless-wheel-housings-pair\"\u003eComplete #304 stainless steel wheel housing assemblies (pair)\u003c\/a\u003e — if the housing itself is cracked or torn out, not just the wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deployment-bag-replacement-rubber-runners-pair\"\u003eInjection molded PVC runners (pair)\u003c\/a\u003e — the skids along the underside of the bag\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deployer-load-out-bag\"\u003eDeployment Load Out Bag\u003c\/a\u003e — the complete bag, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003e\"Force Protector Gear\" and \"Deployer\" are trademarks of their respective owner. Halford Gear is not affiliated with, endorsed by, or an authorized dealer for that company. Compatibility is stated to help you identify the correct part.\u003c\/em\u003e\u003c\/p\u003e","brand":"Halford Gear","offers":[{"title":"Default Title","offer_id":54783653019927,"sku":"HG-WHL-PR","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/6693\/2503\/files\/halford-deployment-bag-replacement-wheels-pair.jpg?v=1788279614"},{"product_id":"deployment-bag-stainless-wheel-housings-pair","title":"Stainless Steel Wheel Housing Assemblies — Complete with Wheels, Pair","description":"\u003cp\u003e\u003cstrong\u003eComplete wheel housing assemblies — #304 stainless steel housing plus a polyurethane ABEC 5 bearing wheel — sold as a pair with the mounting hardware included.\u003c\/strong\u003e This is the full assembly, for when the housing itself is cracked, bent, or has torn away from the bag, not just the wheel.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cp\u003eBuilt to the wheel housing requirements in the USMC collapsible deployment bag purchase description, \u003cstrong\u003ePD-20-01 §3.3.5.1\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing material\u003c\/th\u003e\n\u003ctd\u003e#304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel\u003c\/th\u003e\n\u003ctd\u003ePolyurethane, 3.0 inch outer diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing\u003c\/th\u003e\n\u003ctd\u003eABEC 5, 0.875 inch outer diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eLeft and right, bottom panel at the wheel end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Mexico\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy #304 specifically\u003c\/h3\u003e\n\u003cp\u003eThe specification calls for 304 stainless, not plated mild steel, and the reason shows up two years in. On a bag that lives on wet decks, in cargo holds and on salted tarmac, a plated housing rusts outward from the fastener holes and eventually takes the mounting points with it — and by then the damage is to the bag, not just the part. 304 is the grade that holds up to the salt water resistance PD-20-01 requires of the whole assembly.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Halford deployment bags and other wheeled loadout bags built with stainless corner wheel housings — including \u003cstrong\u003eForce Protector Gear Deployer®\u003c\/strong\u003e bags and USMC-issue wheeled deployment bags built to the same pattern. \u003ca href=\"\/pages\/contact\"\u003eSend us a photo\u003c\/a\u003e of your housing if you want it confirmed before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) #304 stainless steel wheel housings\u003c\/li\u003e\n\u003cli\u003eTwo (2) polyurethane ABEC 5 bearing wheels, installed in the housings\u003c\/li\u003e\n\u003cli\u003eMounting hardware for both assemblies\u003c\/li\u003e\n\u003cli\u003eMade in Mexico\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eField replacement\u003c\/h3\u003e\n\u003cp\u003eReplaceable in the field with a Phillips screwdriver and a 3\/8\" wrench.\u003c\/p\u003e\n\n\u003ch3\u003eAlso available\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deployment-bag-replacement-wheels-pair\"\u003eReplacement wheels only (pair)\u003c\/a\u003e — if the housing is sound and only the wheel is worn\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/deployment-bag-replacement-rubber-runners-pair\"\u003eInjection molded PVC runners (pair)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deployer-load-out-bag\"\u003eDeployment Load Out Bag\u003c\/a\u003e — the complete bag, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003e\"Force Protector Gear\" and \"Deployer\" are trademarks of their respective owner. Halford Gear is not affiliated with, endorsed by, or an authorized dealer for that company. Compatibility is stated to help you identify the correct part.\u003c\/em\u003e\u003c\/p\u003e","brand":"Halford Gear","offers":[{"title":"Default Title","offer_id":54783668748567,"sku":"HG-HSG-PR","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/6693\/2503\/files\/halford-deployment-bag-stainless-wheel-housings-pair.jpg?v=1787684994"},{"product_id":"deployment-bag-replacement-rubber-runners-pair","title":"Replacement Runners for Deployment Bags — Injection Molded PVC, Pair","description":"\u003cp\u003e\u003cstrong\u003eReplacement runners — the skids that run the length of the underside of a deployment bag — sold as a pair with the mounting hardware included.\u003c\/strong\u003e Runners take the drag every time the bag gets hauled up a ramp or across a deck, and they are what the bag rests on when it is standing still. Replacing them costs a fraction of replacing the bottom of the bag.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003eBuilt to the runner dimensions in the USMC collapsible deployment bag purchase description, \u003cstrong\u003ePD-20-01 §3.3.5.2\u003c\/strong\u003e. Measure yours against these before ordering:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e24.75 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e0.75 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e1.1875 inches, tapering to 0.625 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNon-rigid PVC, ASTM D2287\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcess\u003c\/th\u003e\n\u003ctd\u003eInjection molded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eFour #10 screw set assemblies per runner, through the bottom plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInjection molded, not extruded\u003c\/h3\u003e\n\u003cp\u003eYou will see this part sold elsewhere as an \u003cem\u003e“extruded rubber runner”\u003c\/em\u003e. Ours is neither. It is \u003cstrong\u003enon-rigid PVC, injection molded\u003c\/strong\u003e — and for a part whose cross-section tapers from 1.1875 down to 0.625 of an inch and carries four fastener points, that matters. Extrusion produces a constant profile that then has to be cut and drilled; a mould produces the tapered form and the fastener geometry in one shot, the same on every part.\u003c\/p\u003e\n\u003cp\u003eIf you are cross-shopping, that is the difference. Same PD-20-01 dimensions, different process.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Halford deployment bags and other wheeled loadout bags with bolt-on underside runners — including \u003cstrong\u003eForce Protector Gear\u003c\/strong\u003e short-chassis bags and USMC-issue wheeled deployment bags built to the same pattern.\u003c\/p\u003e\n\u003cp\u003eMeasure the runner on your bag end to end. If it is around 24.75 inches with four fasteners, these are the right part. Not sure? \u003ca href=\"\/pages\/contact\"\u003eSend us a photo\u003c\/a\u003e before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) injection molded PVC runners\u003c\/li\u003e\n\u003cli\u003eMounting hardware for both runners\u003c\/li\u003e\n\u003cli\u003eMade in Mexico\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eField replacement\u003c\/h3\u003e\n\u003cp\u003eReplaceable in the field with a Phillips screwdriver and a 3\/8\" wrench. Pull the old runners, line the new ones up on the existing holes, torque down.\u003c\/p\u003e\n\n\u003ch3\u003eAlso available\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/deployment-bag-replacement-wheels-pair\"\u003eReplacement polyurethane ABEC 5 wheels (pair)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/deployment-bag-stainless-wheel-housings-pair\"\u003eComplete #304 stainless steel wheel housings (pair)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deployer-load-out-bag\"\u003eDeployment Load Out Bag\u003c\/a\u003e — the complete bag, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003e\"Force Protector Gear\" and \"Deployer\" are trademarks of their respective owner. Halford Gear is not affiliated with, endorsed by, or an authorized dealer for that company. Compatibility is stated to help you identify the correct part.\u003c\/em\u003e\u003c\/p\u003e","brand":"Halford Gear","offers":[{"title":"Default Title","offer_id":54783691260183,"sku":"HG-RUN-PR","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/6693\/2503\/files\/halford-deployment-bag-replacement-runners-pair.jpg?v=1787685059"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/6693\/2503\/collections\/halford-deployment-bag-stainless-wheel-housings-pair_4dea1b3a-fd53-44c7-bcaf-b23f81c97a19.jpg?v=1787686013","url":"https:\/\/halfordgear.com\/collections\/accessories.oembed","provider":"Halford Gear","version":"1.0","type":"link"}